{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Available alternative:
-
Article no.: 308605 40
Pull stud Form A 40
Article no.: 308600 40
Article code:
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 26 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308600 40 | |
| EAN / GTIN | 4045197150905 | |
| Manufacturer number | 308600 40 |
Description
Beschreibung:
Der Werkzeughalter wird über den Anzugsbolzen vom Spanngreifer der Spindel fest in die Spindel gezogen. Anzugsbolzen gibt es in verschiedenenAusführungen. Sie stellen ein wichtiges Bindeglied zwischen Maschine und Werkzeug. Die Anforderungen an Genauigkeit, Festigkeit und Zuverlässigkeit von Anzugsbolzen sind hoch.
Verwendung:
- Für Werkzeuge mit Steilkegelschaft DIN 69871 und JIS B 6339 (MAS-BT).
- In Bearbeitungszentren (Maschinen mit automatischem Werkzeugwechsler).
- In NC-Maschinen (Maschinen ohne automatischem Werkzeugwechsler).
Hinweis:
Bei Montage des AB auf korrektes Anzugsmoment achten.
ISO 7388-3 entspricht alter Norm DIN 69872.
ISO 7388-3 entspricht alter Norm DIN 69872.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Pull stud Form A 40
on request
In stock
5,604 pieces in stock
BGN 23.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
136 pieces in stock
CHF 14.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
226 pieces in stock
CHF 10.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
115 pieces in stock
CHF 12.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
14 pieces in stock
CHF 12.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
20 pieces in stock
CHF 12.60
plus VAT at the current rate
Prices plus delivery costs
|
|
| Pull stud standard | ISO 7388-3 | ISO 7388-3 | ISO 7388-3 | MAS 403 | MAS 403 | MAS 403 |
| Overall length L | 54 mm | 54 mm | 54 mm | 60 mm | 60 mm | 60 mm |
| Thread M | M16 | M16 | M16 | M16 | M16 | M16 |
| L1 | 26 mm | 26 mm | 26 mm | 35 mm | 35 mm | 35 mm |
| suitable for steep tapers | 40 | 40 | 40 | 40 | 40 | 40 |
| Hole characteristics | with bore | avec alésage | avec alésage | avec alésage | avec alésage | avec alésage |
| Type of product | Pull Stud | Tirettes | Tirettes | Tirettes | Tirettes | Tirettes |