{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Pentron® indexable drill Plain shank, 3×D, ⌀ DC m7: 16mm
Article no.: 236615 16
Article code:
- Drill depth for indexable insert drill up to: 3×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 16 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 48 mm | |
| Overhang LA | 64 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| ISO code indexable insert | SOGX 040204 10-... | |
| Pack of insert screws | 239652 5IP1 (0.38 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236615 16 | |
| EAN / GTIN | 4047109277472 | |
| Manufacturer number | U43 01600 |
Description
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.2
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
KUB Pentron® indexable drill Plain shank, 3×D, ⌀ DC m7: 16mm
on request
Subsequent delivery
0 pieces in stock
BGN 904.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
BGN 796.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
BGN 647.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
BGN 958.15
plus VAT at the current rate
Prices plus delivery costs
|
|
| Drill depth for indexable insert drill up to | 3×D | 3×D | 3×D | 3×D |
| ISO code indexable insert | SOGX 040204 10-... | SOGX 050204 | SOMT05T204 / XOMT05T204 | SOGX 050204 |
| Nominal ⌀ D | 16 | 16 | 16 | 16 |
| Pack of insert screws | 239652 5IP1 (0.38 Nm) | 239700 5IP (0.38 Nm) | 232980 1 (TX6;0.4Nm) | 239700 5IP (0.38 Nm) |
| Reach L1 | 48 mm | 48 mm | 51 mm | 48 mm |
| Type of product | Indexable drill | Indexable drill | Indexable drill | Indexable drill |
| Overhang LA | 64 mm | 64 mm | 67 mm | 78 mm |