{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Drill depth for indexable insert drill up to: 3×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Nominal ⌀ D | 23 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Reach L1 | 69 mm | |
| for inch ⌀ | 29/32 in | |
| Overhang LA | 93 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank length Ls | 56 mm | |
| Maximum adjustment limit Vmax | 0.5 mm | |
| ISO code indexable insert | WOEX 040304 | |
| Pack of insert screws | 239700 6IP1 (1.0 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 149 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 232300 23 | |
| EAN / GTIN | 4045197346001 | |
| Manufacturer number | 232300 23 |
Description
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Inserts WOEX 040304.
Note:
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
The enquiry form can be found in the eShop on the product page under “Forms”.
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
The enquiry form can be found in the eShop on the product page under “Forms”.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable drill combination shank 23 mm
on request
In stock
5 pieces in stock
BGN 715.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
315,12 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Vnútorné chladenie | yes | áno |
| Kód ISO vhodná Otočná rezná platnička | WOEX 040304 | WOEX 040304 |
| Menovitý-⌀ D | 23 | 23 |
| Stopka | DIN 6535 HE, DIN 6595 | DIN 6535 HE, DIN 6595 |
| Úžitková dĺžka L1 | 69 | 69 |
| pre ⌀ palca | 29/32 | 29/32 |
| Druh produktu | Indexable drill | Vrták s vymeniteľnými doštičkami |