{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiPer-Drill base body 18 mm
Article no.: 231610 18
Article code:
- Number of cutting edges Z: 2
Product details
Technical Data
| Series | HiPer-Drill | |
| Number of cutting edges Z | 2 | |
| Dia. range Dc | 18 mm - 18.99 mm | |
| Reach L1 | 95 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank length Ls | 56 mm | |
| Clamping screw | 231999 8IP1 (1.2 Nm) | |
| Overall length L | 180 mm |
Identification numbers & Classifications
| Article number | 231610 18 | |
| EAN / GTIN | 4045197603012 | |
| Manufacturer number | 231610 18 |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HiPer-Drill base body 18 mm
on request
In stock
11 pieces in stock
BGN 847.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
70 pieces in stock
BGN 832.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
BGN 924.41
plus VAT at the current rate
Prices plus delivery costs
|
|
| Dia. range Dc | 18 mm - 18.99 mm | 18 mm - 24 mm | 18 mm - 24 mm |
| Number of cutting edges Z | 2 | 2 | 2 |
| Version | 5×D | 5×D | |
| Through-coolant | yes | yes | |
| Shank | ISO 9766 | Morse taper | |
| Reach L1 | 95 mm | 168.3 mm | 171.5 mm |
| Type of product | Indexable drill | Indexable drill | |