{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17 25/2 mm
Article no.: 227505 25/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overhang L1 | 36 mm | |
| Overall length Ltot | 92 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| ⌀ D3 | 18 mm | |
| Circular interpolation milling ⌀ Dmin | 43 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.86 degrees | |
| Ramping length L for αmax | 16.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227505 25/2 | |
| EAN / GTIN | 4960664406647 | |
| Manufacturer number | THN63251 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Indexable milling cutter 90° MEC17 25/2 mm
on request
In stock
1 pieces in stock
BGN 594.68
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
BGN 643.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
BGN 428.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
BGN 436.34
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 |
| Overhang L1 | 36 | 31 | 44 | 44 |
| Milling application | Circular milling ;Ramping ;End milling | End milling | Corner milling ;Circular milling ;Ramping | End milling |
| suitable indexable insert | BDMT 170408 | SOMT 09T304 | AP.. 1805.. | AP.. 16.. |
| Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
| Shank ⌀ Ds h6 | 25 | 25 | 25 | 25 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |