{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable face / shoulder mill 90° 25/2 mm
Article no.: 215045 25/2
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Overhang L1 | 31 mm | |
| Overall length Ltot | 105 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| suitable indexable insert | SOMT 09T304 | |
| Pack of insert screws | 219810 (9IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215045 25/2 | |
| EAN / GTIN | 4045197221674 | |
| Manufacturer number | 215045 25/2 |
Description
Version:
Made of hardened special steel for low vibration and long life. Very good surface finishes are obtained due to projecting flat cutting edge.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable face / shoulder mill 90° 25/2 mm
on request
In stock
18 pieces in stock
BGN 643.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
BGN 428.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
BGN 436.34
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Overhang L1 | 31 mm | 44 mm | 44 mm |
| Milling application | End milling | Corner milling; Circular milling; Ramping | End milling |
| Overall length Ltot | 105 mm | 100 mm | 100 mm |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees |
| Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |