{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HELI3MILL shoulder mill, Plain shank, ⌀ DC / number of effective cutting edges Z: 25/3mm
Article no.: 226480 25/3
Article code:
New product
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HELI3MILL | |
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Overhang L1 | 25 mm | |
| Overall length Ltot | 120 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| ⌀ D3 | 21 mm | |
| Circular interpolation milling ⌀ Dmin | 46.4 mm | |
| Circular interpolation milling ⌀ Dmax | 49 mm | |
| Circular interpolation milling ap | 3.4 mm | |
| Ramping angle αmax | 2.9 degrees | |
| Ramping length L for αmax | 159.9 mm | |
| suitable indexable insert | TP..1003.. | |
| Manufacturer's designation | HM390 ETP D25-3-C25-10 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226480 25/3 | |
| EAN / GTIN | 7291075313901 | |
| Manufacturer number | 3106414 |
Description
Version:
Reliable shoulder milling system for a wide range of applications. Versions in two system sizes with cutting edge lengths in 10 and 15 mm. Optimally supported Trigon indexable inserts in the seat ensure true 90° shoulders. Ideally suited for circular interpolation milling operations and ramping.
Spare part:
Pack of indexable insert screws No. 229695 1 (TX10; 3.2 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HELI3MILL shoulder mill, Plain shank, ⌀ DC / number of effective cutting edges Z: 25/3mm
on request
In stock
6 pieces in stock
BGN 789.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
BGN 793.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
BGN 834.44
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 | 4 |
| Milling application | Circular milling; Ramping; Plunging | Corner milling | Corner milling |
| Overall length Ltot | 120 mm | 180 mm | 120 mm |
| Through-coolant | yes | yes | yes |
| Shank type | Plain shank | Plain shank | Plain shank |
| Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |
| Type of product | End / face mill | End / face mill | End / face mill |