{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NEODO indexable face / shoulder mill 25/3 mm
Article no.: 225751 25/3
Article code:
New product
- Setting angle κ: 90
- Milling application: Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Series | NEODO | |
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 5 mm | |
| Overhang L1 | 35 mm | |
| Overall length Ltot | 95 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| suitable indexable insert | SZ.U0804.. | |
| Manufacturer's designation | S890 ESZ D25-3-W25-R08 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 225751 25/3 | |
| EAN / GTIN | 7291075481631 | |
| Manufacturer number | 3417103 |
Description
Version:
Highly efficient milling system for facing and milling 90° shoulders. For roughing and pre-finishing especially of steel and cast iron materials. Cost-effective due to 8 cutting edges per indexable insert. Extremely stable embedding for the inserts in a dovetail-shaped insert seating.
Spare part:
Pack of insert screws No. 229696 3 (IP9; 2.0 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
NEODO indexable face / shoulder mill 25/3 mm
on request
In stock
9 pieces in stock
BGN 865.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
BGN 494.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
BGN 811.95
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 35 mm | 39 mm | 30 mm |
| Overall length Ltot | 95 mm | 95 mm | 105 mm |
| suitable indexable insert | SZ.U0804.. | SO.. 0836.. | LO.U0904.. |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm |
| Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |
| maximum cutting depth ap max | 5 mm | 6 mm | 8 mm |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing |