{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HAIMER MILL solid carbide torus cutter SAFE-LOCK, AlTiN, ⌀ f9 DC / R1: 8/1,0mm
Article no.: 220298 8/1,0
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | AlTiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 32 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | Safe-Lock h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 19 mm | |
| Corner radius R1 | 1 mm | |
| Overhang length L1 incl. recess | 26 mm | |
| Recess ⌀ D1 | 7.6 mm | |
| Overall length L | 64 mm | |
| Shank ⌀ Ds | 8 mm | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.044 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.052 mm | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 220298 8/1,0 | |
| EAN / GTIN | 4034221161932 | |
| Manufacturer number | F2004NNL0800R1.00DA |
Application Table
N
480
N
480
N
375
P
275
P
255
P
210
P
190
M
95
M
75
S
35
K
155
Description
Version:
With SAFE-LOCK pull-out protection to provide an additional form fit for the tool. In conjunction with SAFE-LOCK tool holders, it secures the tool to prevent it being pulled out.
For general-purpose use in steel materials and high-alloy steels, especially stainless steel. With cylindrical core for optimum tool stiffness when milling slots. Reliable processes guaranteed when ramping and during circular interpolation milling thanks to special end face geometry.
For general-purpose use in steel materials and high-alloy steels, especially stainless steel. With cylindrical core for optimum tool stiffness when milling slots. Reliable processes guaranteed when ramping and during circular interpolation milling thanks to special end face geometry.
Note:
Tool arbor with the SAFE-LOCK pull-out protection can be found under clamping technology.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
HAIMER MILL solid carbide torus cutter SAFE-LOCK, AlTiN, ⌀ f9 DC / R1: 8/1,0mm
on request
In stock
23 pieces in stock
BGN 123.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
121 pieces in stock
BGN 98.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
BGN 165.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
141 pieces in stock
BGN 126.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
BGN 167.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
BGN 147.55
plus VAT at the current rate
Prices plus delivery costs
|
|
| Recess ⌀ D1 | 7.6 mm | 7.4 mm | 7.4 mm | 7.4 mm | 7.7 mm | 7.8 mm |
| Shank | Safe-Lock h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Cutting edge ⌀ DC | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
| Flute length Lc | 19 mm | 21 mm | 21 mm | 21 mm | 19 mm | 19 mm |
| Tolerance nominal ⌀ | f8 | h6 | f8 | h6 | e8 | e8 |
| Type | N | W | W | W | N | W |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |