{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut 90° shoulder mill MTC, Plain shank, ⌀ D / number of teeth Z: 20/2mm
Article no.: 215565 20/2
Article code:
- Setting angle κ: 90
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 50 mm | |
| Overall length Ltot | 160 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| ⌀ D3 | 17 mm | |
| Circular interpolation milling ⌀ Dmin | 37 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Circular interpolation milling ap | 1.7 mm | |
| Ramping angle αmax | 1.19 degrees | |
| Ramping length L for αmax | 14.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215565 20/2 | |
| EAN / GTIN | 4045197409096 | |
| Manufacturer number | 215565 20/2 |
Description
Prevedenie:
Presná rohová fréza s nerovnakým rozstupom pre hladký chod, najvyššiu presnosť a rezný výkon. Nová generácia vysokovýkonných rohových fréz s otočnými reznými doštičkami a geometriou s redukovanou reznou silou, aby bolo možné použiť MTC pri práci v nestabilných podmienkach alebo na vretená s nižším výkonom pohonu.
Použitie:
Na rohové frézovanie do výrazných hĺbok, aj do plného materiálu. Univerzálne použitie na všetky oceľové materiály vrátane nehrdzavejúcich ocelí a ocelí odolných proti kyselinám.
Náhradní díl:
Súprava skrutiek na vymeniteľné doštičky č. 219826 (8IP; 2,2 Nm).
Poznámka:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Softcut 90° shoulder mill MTC, Plain shank, ⌀ D / number of teeth Z: 20/2mm
on request
In stock
36 pieces in stock
BGN 562.29
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
336,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 |
| Overhang L1 | 50 mm | 30 mm |
| Milling application | End milling; Circular milling; Ramping | Kruhové frézovanie |
| Overall length Ltot | 160 mm | 160 mm |
| Through-coolant | yes | áno |
| Cutting edge ⌀ DC | 20 mm | 20 mm |
| Type of product | End / face mill | Rohová fréza |