{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D1 h6 | 17 mm | |
| ⌀ D2 | 28.7 mm | |
| ⌀ D3 | 16 mm | |
| Overall length Ltot | 42 mm | |
| Mounting thread M | M16 | |
| Circular interpolation milling ⌀ Dmin | 48 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Circular interpolation milling ap | 3.5 mm | |
| Ramping angle αmax | 5.37 degrees | |
| Ramping length L for αmax | 11.92 mm | |
| suitable indexable insert | RD..1604 | |
| Pack of insert screws | 219800 (20IP; 5.7 Nm) | |
| Set of retaining washers | 219955 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212170 32/2 | |
| EAN / GTIN | 4045197192936 | |
| Manufacturer number | 212170 32/2 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Application:
With pack of insert screws No. 219800 - for securing indexable inserts and retaining washers.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Copy mill 0° negative 32/2 mm
on request
In stock
48 pieces in stock
BGN 392.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
BGN 643.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
BGN 479.07
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling application | Circular milling ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging |
| Overall length Ltot | 42 | 42 | 47 |
| Shank type | with threaded shank | with threaded shank | with threaded shank |
| Cutting edge ⌀ DC | 32 | 32 | 32 |
| Circular interpolation milling ⌀ Dmax | 62 | 62 | 62 |
| Ramping length L for αmax | 11.92 | 10.5 | 12.34 |
| Type of product | Copy mill | Copy mill | Copy mill |