{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 42 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 30 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| Circular interpolation milling ⌀ Dmin | 72 mm | |
| Circular interpolation milling ⌀ Dmax | 82 mm | |
| Circular interpolation milling ap | 2.5 mm | |
| Ramping angle αmax | 1.79 degrees | |
| Ramping length L for αmax | 26.94 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Setting angle κ | 15 – 27 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212145 42/4 | |
| EAN / GTIN | 4045197192776 | |
| Manufacturer number | 212145 42/4 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Copy mill 0° negative 42/4 mm
on request
In stock
10 pieces in stock
BGN 548.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
BGN 771.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
BGN 677.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 4 | 4 | 4 |
| Milling application | Circular milling ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Circular milling |
| Overall length Ltot | 40 | 40 | 40 |
| Through-coolant | yes | yes | yes |
| Shank type | with bore | with bore | with bore |
| ⌀ D3 | 30 | 26 | 30 |
| Circular interpolation milling ⌀ Dmin | 72 | 68 | 72 |