{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 20 mm
Article no.: 192890 20
Article code:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 38 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.048 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192890 20 | |
| EAN / GTIN | 4045197108722 | |
| Manufacturer number | 192890 20 |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Economy version.
Centre cutting teeth for plunging.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill HSS-PM 20 mm
on request
In stock
122 pieces in stock
BGN 245.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
BGN 247.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
409 pieces in stock
BGN 296.89
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
BGN 347.51
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | no | no | no | no |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm |
| Flute length Lc | 38 mm | 38 mm | 38 mm | 38 mm |
| Tool material | HSS PM | HSS PM | HSS PM | HSS PM |
| No. of teeth Z | 5 | 3 | 5 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.3 mm | 0.6 mm | 0.3 mm | 0.3 mm |