{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 10 mm
Article no.: 192890 10
Article code:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.024 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192890 10 | |
| EAN / GTIN | 4045197108678 | |
| Manufacturer number | 192890 10 |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Economy version.
Centre cutting teeth for plunging.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill HSS-PM 10 mm
on request
In stock
138 pieces in stock
BGN 109.54
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
70 pieces in stock
BGN 106.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
270 pieces in stock
BGN 125.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
96 pieces in stock
BGN 130.90
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | green | without |
| Through-coolant | no | no | no | no |
| Standard | DIN 844 | DIN 844 B | DIN 844 | DIN 844 B |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Flute length Lc | 22 mm | 22 mm | 22 mm | 22 mm |
| Tolerance nominal ⌀ | k12 | js12 | ±0.12 | k10 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |