{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8 16 mm
Article no.: 192520 16
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: WR
- Tolerance nominal ⌀: js14
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | js14 | |
| No. of teeth Z | 3 | |
| Helix angle | 36 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 63 mm | |
| Overall length L | 123 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.075 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192520 16 | |
| EAN / GTIN | 4045197106698 | |
| Manufacturer number | 192520 16 |
Application Table
N
138
N
83
M
9
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
Advantage:
Suitable for high machining volumes due to the large flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill HSS-Co8 16 mm
on request
In stock
119 pieces in stock
BGN 190.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
BGN 205.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
141 pieces in stock
BGN 175.44
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
BGN 195.68
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | TiAlN |
| Milling profile | WR | NF | HR | NR |
| Overall length L | 123 mm | 123 mm | 123 mm | 123 mm |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Helix angle | 36 degrees | 25 degrees | 30 degrees | 30 degrees |
| Corner chamfer width at 45° | 0.5 mm | 0.5 mm | 0.25 mm | 0.5 mm |