{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill 16 mm
Article no.: 191700 16
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 63 mm | |
| Overall length L | 123 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191700 16 | |
| EAN / GTIN | 4045197104632 | |
| Manufacturer number | 191700 16 |
Application Table
N
83
P
30
P
25
P
25
K
23
N
55
Description
Version:
Relief ground truncated-type roughing profile.
Centre cutting teeth for plunging.
The wide tooth lands can be re-ground frequently without losing the profile.
Universal cutter for profile milling or for plunging.
Centre cutting teeth for plunging.
The wide tooth lands can be re-ground frequently without losing the profile.
Universal cutter for profile milling or for plunging.
Advantage:
Compared to multi−flute cutters, better chip evacuation due to larger flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Semi-roughing end mill 16 mm
on request
In stock
29 pieces in stock
BGN 205.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
119 pieces in stock
BGN 190.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
141 pieces in stock
BGN 175.44
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
BGN 195.68
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | TiAlN |
| Milling profile | NF | WR | HR | NR |
| Overall length L | 123 mm | 123 mm | 123 mm | 123 mm |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Helix angle | 25 degrees | 36 degrees | 30 degrees | 30 degrees |
| Corner chamfer width at 45° | 0.5 mm | 0.5 mm | 0.25 mm | 0.5 mm |