{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills HSS-Co8, uncoated, ⌀ e8 DC: 11mm
Article no.: 191200 11
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 11 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 79 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.02 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191200 11 | |
| EAN / GTIN | 4045197100825 | |
| Manufacturer number | 191200 11 |
Application Table
N
83
P
30
P
25
P
23
K
23
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Slot drills HSS-Co8, uncoated, ⌀ e8 DC: 11mm
on request
In stock
133 pieces in stock
BGN 61.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
137 pieces in stock
BGN 70.62
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
142 pieces in stock
BGN 78.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
199 pieces in stock
BGN 54.88
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | TiAlN | uncoated | uncoated |
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Colour ring | without | without | yellow | without |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Type | N | N | W | N |
| No. of teeth Z | 3 | 3 | 3 | 4 |