{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills HSS-Co8 16 mm
Article no.: 191200 16
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.03 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191200 16 | |
| EAN / GTIN | 4045197100870 | |
| Manufacturer number | 191200 16 |
Application Table
N
83
P
30
P
25
P
23
K
23
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Slot drills HSS-Co8 16 mm
on request
In stock
185 pieces in stock
BGN 81.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
431 pieces in stock
BGN 98.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
99 pieces in stock
BGN 120.11
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
760 pieces in stock
BGN 75.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
975 pieces in stock
BGN 89.30
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | no | no | no | no | no |
| Standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30-40 degrees | 30-40 degrees |
| No. of teeth Z | 3 | 3 | 3 | 4 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |