{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Metal circular saw blade coarse HZ 50X1 mm
Article no.: 176000 50X1
Article code:
Click to enlarge image
Click to enlarge image
Arbors for saw blades ⌀ 20 - 63 mm see No. 345510 / 345555
Click to enlarge image
Raked teeth form C
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: HSS
- Norm: DIN 1838
Product details
Technical Data
| ⌀ | 50 mm | |
| Thickness | 1 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Norm | DIN 1838 | |
| Bore ⌀ | 13 mm | |
| No. of teeth Z | 40 | |
| Through-coolant | no | |
| Type of product | Circular saw blade |
Identification numbers & Classifications
| Article number | 176000 50X1 | |
| EAN / GTIN | 4045197244253 |
Application Table
N
800
N
600
P
37
P
22
P
20
P
15
M
11
M
11
K
27
N
400
Description
Version:
All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.
DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.
Application:
Particularly suitable for cutting workpieces with low to medium tensile strength. High cutting performance due to the chip breaking tooth form.
Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.
Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.
Note:
The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
Metal circular saw blade coarse HZ 50X1 mm
on request
Available in 1-2 weeks
0 pieces in stock
BGN 94.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
BGN 506.06
plus VAT at the current rate
Prices plus delivery costs
|
|
| ⌀ | 50 | 50 |
| Bore ⌀ | 13 | 8 |
| Through-coolant | no | no |
| Tool material | HSS | Solid carbide |
| Thickness | 1 | 1 |
| No. of teeth Z | 40 | 32 |
| Type of product | Circular saw blade | Circular saw blade |