{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7, uncoated, Nominal ⌀ DC: 6mm
Article no.: 164000 6
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 6 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 26 mm | |
| Overhang L1 | 68 mm | |
| Overall length L | 138 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.1 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 6 | |
| EAN / GTIN | 4045197091826 | |
| Manufacturer number | 164000 6 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer H7, uncoated, Nominal ⌀ DC: 6mm
on request
In stock
71 pieces in stock
BGN 122.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3,720 pieces in stock
BGN 42.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
BGN 100.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
318 pieces in stock
BGN 88.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
135 pieces in stock
BGN 136.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
BGN 195.23
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 6 | 6 | 6 | 6 | 6 |
| Overall length L | 138 mm | 93 mm | 93 mm | 93 mm | 93 mm | 138 mm |
| Standard | DIN 208 B | Manufacturer’s standard | Manufacturer’s standard | DIN 212 B | DIN 212 B | DIN 208 B |
| Shank | Morse taper | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 | Plain shank with h9 | Morse taper |
| Application for type of drilling | for through hole | for through holes | for through holes | for through holes | for through holes | for through hole |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit | Phillips bit |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm |