{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7, uncoated, Nominal ⌀ DC: 36mm
Article no.: 164000 36
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 36 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 79 mm | |
| Overhang L1 | 200 mm | |
| Overall length L | 325 mm | |
| Number of cutting edges Z | 10 | |
| Morse taper MT size | 4 | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 36 | |
| EAN / GTIN | 4045197092076 | |
| Manufacturer number | 164000 36 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Machine reamer H7, uncoated, Nominal ⌀ DC: 36mm
on request
Available in 2-3 weeks
0 pieces in stock
BGN 497.07
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
BGN 775.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 859.18
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 825.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
BGN 652.26
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 8 | 8 | 10 |
| Overhang L1 | 200 mm | 200 mm | 139 mm | 139 mm | 177 mm |
| Coating | uncoated | uncoated | TiAlN | TiAlN | uncoated |
| Colour ring | without | without | green | green | without |
| Overall length L | 325 mm | 325 mm | 200 mm | 200 mm | 284 mm |
| Standard | DIN 208 B | DIN 208 B | Manufacturer’s standard | Manufacturer’s standard | DIN 206 B |
| Flute length Lc | 79 mm | 79 mm | 25 mm | 25 mm | 142 mm |