{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Indexable milling cutter 90° MFWN 100/7 mm
Artikel-Nr.: 225615 100/7
Sachnummer:
- Setting angle κ: 90
- Milling application: Plunging; End milling
- Through-coolant: yes
Produktdetails
Technische Daten
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 8 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| suitable indexable insert | WNMU 0806.. | |
| Insert screw | 229700 (T15; 4.2 Nm) | |
| Type of product | End / face mill |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 225615 100/7 | |
| EAN / GTIN | 4960664647699 | |
| Herstellernummer | THN04702 |
Beschreibung
Version:
Milling cutter with double-sided indexable inserts.
The combination of approach angle, chip chamber design as well as the geometries and cutting angles of the indexable inserts ensure outstanding metal removal rates, chip clearance, working life, and low cutting forces, and hence high cost-effectiveness.
The combination of approach angle, chip chamber design as well as the geometries and cutting angles of the indexable inserts ensure outstanding metal removal rates, chip clearance, working life, and low cutting forces, and hence high cost-effectiveness.
Mit ähnlichen Produkten vergleichen
Dieser Artikel |
Empfehlungen |
|
|---|---|---|
Indexable milling cutter 90° MFWN 100/7 mm |
||
| Number of cutting edges Z | 7 | 7 |
| Overall length Ltot | 50 | 50 |
| suitable indexable insert | WNMU 0806.. | AP.. 1805.. |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 100 | 100 |
| Setting angle κ | 90 | 90 |
| Type of product | End / face mill | End / face mill |