{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro Steel solid carbide roughing end mill HPC 18 mm
Article no.: 203054 18
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: 0 / -0.03
- No. of teeth Z: 4
Product details
Technical Data
| Series | Pro Steel | |
| Cutting edge ⌀ DC | 18 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | 0 / -0.03 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 32 mm | |
| Overhang length L1 incl. recess | 50 mm | |
| Recess ⌀ D1 | 17.5 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 18 mm | |
| Corner chamfer width at 45° | 0.4 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.1 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.13 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203054 18 | |
| EAN / GTIN | 4045197713063 | |
| Manufacturer number | 203054 18 |
Application Table
P
260
P
240
P
180
P
160
M
80
K
250
Description
Version:
For roughing and finishing.
Up to 1×D into solid material at very high feed rates with smooth cutting action. Dimensions to manufacturer’s standard.
Up to 1×D into solid material at very high feed rates with smooth cutting action. Dimensions to manufacturer’s standard.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HOLEX Pro Steel solid carbide roughing end mill HPC 18 mm
on request
In stock
305 pieces in stock
US $ 181.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
US $ 210.68
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
US $ 311.85
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 50 | 50 | 67 |
| Coating | TiAlN | TiAlN | TiAlN |
| Cutting edge ⌀ DC | 18 | 18 | 18 |
| Helix angle | 38 | 45 | 38 |
| Type | N | N | N |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill |