{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 16 mm
Article no.: 202825 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 35 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.1×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 65 mm | |
| Overall length L | 150 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.18 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.1 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202825 16 | |
| EAN / GTIN | 4045197948205 | |
| Manufacturer number | 202825 16 |
Application Table
N
210
N
140
P
80
P
75
P
70
P
50
P
40
H
25
M
60
M
40
K
70
Description
Version:
Double relief ground side clearance angle.
With high-performance coating for general-purpose use.
With high-performance coating for general-purpose use.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide milling cutter 16 mm
on request
In stock
15 pieces in stock
US $ 328.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
US $ 322.13
plus VAT at the current rate
Prices plus delivery costs
|
|
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Shank form | HB | HB |
| Cutting edge ⌀ DC | 16 | 16 |
| Tolerance nominal ⌀ | e8 | e8 |
| Type | N | N |
| Feed fz for side milling in steel < 900 N/mm2 | 0.1 | 0.1 |
| Corner chamfer width at 45° | 0.18 | 0.15 |