{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8 10 mm
Article no.: 192930 10
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.15×D for side milling | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.18 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.02 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192930 10 | |
| EAN / GTIN | 4045197108890 | |
| Manufacturer number | 192930 10 |
Application Table
N
120
N
101
P
78
P
55
M
17
N
92
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Economy version.
Centre cutting teeth for plunging.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Roughing end mill HSS-Co8 10 mm
on request
In stock
135 pieces in stock
US $ 56.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
413 pieces in stock
US $ 51.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
715 pieces in stock
US $ 31.28
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | no | no | no |
| Standard | DIN 844 | DIN 844 | DIN 844 |
| Cutting edge ⌀ DC | 10 | 10 | 10 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Helix angle | 30 | 30 | 30 |
| Shank ⌀ Ds | 10 | 10 | 10 |
| Type of product | End / face mill | End / face mill | End / face mill |