{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill 15 mm
Article no.: 192480 15
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 15 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 53 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.021 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192480 15 | |
| EAN / GTIN | 4045197106421 | |
| Manufacturer number | 192480 15 |
Application Table
N
83
P
28
P
23
P
23
K
23
N
55
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Roughing end mill 15 mm
on request
In stock
15 pieces in stock
US $ 79.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
211 pieces in stock
US $ 40.01
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
87 pieces in stock
US $ 51.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
135 pieces in stock
US $ 50.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
187 pieces in stock
US $ 40.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
160 pieces in stock
US $ 46.39
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 | 90 | 90 | 90 | 90 | 90 |
| Colour ring | without | without | without | yellow | without | without |
| Cutting edge ⌀ DC | 15 | 15 | 15 | 15 | 15 | 15 |
| Helix angle | 25 | 30 | 30 | 42 | 30-40 | 30-40 |
| Tolerance nominal ⌀ | js12 | e8 | e8 | e8 | k10 | k10 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 12 | 12 | 12 | 12 | 12 | 12 |