{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-Co8, uncoated, ⌀ k10 DC: 15mm
Article no.: 191500 15
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: k10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 15 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 4 | |
| Helix angle | 30-40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.028 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191500 15 | |
| EAN / GTIN | 4045197102973 | |
| Manufacturer number | 191500 15 |
Application Table
N
83
P
30
P
25
P
25
K
23
N
55
Description
Version:
Multi-flute end mill. Eccentric relief ground.
Centre cutting edge geometry for plunging.
Centre cutting edge geometry for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
End mill HSS-Co8, uncoated, ⌀ k10 DC: 15mm
on request
In stock
180 pieces in stock
US $ 40.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
192 pieces in stock
US $ 40.01
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
US $ 51.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
127 pieces in stock
US $ 50.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
149 pieces in stock
US $ 46.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
US $ 79.82
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without | yellow | without | without |
| Through-coolant | no | no | no | no | no | no |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Cutting edge ⌀ DC | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm |
| Helix angle | 30-40 degrees | 30 degrees | 30 degrees | 42 degrees | 30-40 degrees | 25 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |