{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8 20 mm
Article no.: 192450 20
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 38 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.6 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192450 20 | |
| EAN / GTIN | 4045197106315 | |
| Manufacturer number | 192450 20 |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Economy version.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Economy version.
Advantage:
Compared to multi−flute cutters, better chip evacuation due to larger flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill HSS-Co8 20 mm
on request
In stock
5 pieces in stock
US $ 106.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
US $ 93.89
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
US $ 82.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
US $ 55.66
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | uncoated | uncoated |
| Corner chamfer angle | 45 | 45 | 45 | 45 |
| Milling profile | NR | NF | NR | NR |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tolerance nominal ⌀ | js12 | k10 | js12 | k12 |
| Corner chamfer width at 45° | 0.6 | 0.5 | 0.6 | 0.5 |
| Shank ⌀ Ds | 20 | 20 | 20 | 20 |