{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Tap machine tap HSS-E-PM 1/16-27
Article no.: 138105 1/16-27
Article code:
- Thread type: NPT
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: ANSI B 1.20.1
Product details
Technical Data
| Thread size | 1/16-27 NPT | |
| Coating | AlTiX | |
| Thread type | NPT | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | ANSI B 1.20.1 | |
| Taper lead form | C | |
| Taper ratio | 1:16 | |
| Helix angle | 40 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | Blind hole; Through hole | |
| Cutting direction | right-hand | |
| Thread pitch | 0.941 mm | |
| Threads per inch | 27 | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank square □ | 4.9 mm | |
| Tapping hole ⌀ A | 6.15 mm | |
| Tapping hole ⌀ B | 5.95 mm | |
| Thread gauge ⌀ Dmax + 0.05 | 6.39 mm | |
| Tapping hole minimum depth | 12 mm | |
| Thread ⌀ | 7.895 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | green | |
| Number of cutting edges Z | 3 | |
| Thread depth | 15.8 mm | |
| Series | Master Tap | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 138105 1/16-27 | |
| EAN / GTIN | 4045197984371 | |
| Manufacturer number | 138105 1/16-27 |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum chip evacuation.
Application:
Tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants. See the table for the specified minimum size of the tapping hole.
Recommendation:
Tapping hole ⌀ A:
Pre-drill a plain hole without using a reamer.
Tapping hole ⌀ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer (see No. 162650). The taper bore ⌀ can then be checked laterally by reference to the Dmax check dimension (see table). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.
Pre-drill a plain hole without using a reamer.
Tapping hole ⌀ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer (see No. 162650). The taper bore ⌀ can then be checked laterally by reference to the Dmax check dimension (see table). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.