{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill long HSS W 7 mm
Article no.: 116040 7
Article code:
- Tool material: HSS
- Standard: DIN 340
- Type: W
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 7 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 340 | |
| Type | W | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Helix angle | 30-40 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 91.5 mm | |
| Flute length Lc | 102 mm | |
| Overall length L | 156 mm | |
| Shank ⌀ Ds | 7 mm | |
| Feed f in aluminium short-chipping | 0.14 mm/rev. | |
| Colour ring | yellow | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116040 7 | |
| EAN / GTIN | 4045197025869 | |
| Manufacturer number | 116040 7 |
Application Table
N
70
N
45
N
40
Description
Version:
With point geometry shape A from size 2.5 mm.
Strengthened core without core taper. Precision ground point. Wide flutes with heavily honed back edges. Bright ground surface finish.
Strengthened core without core taper. Precision ground point. Wide flutes with heavily honed back edges. Bright ground surface finish.
Advantage:
For deep hole drilling and for use with drill bushings.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Jobber drill long HSS W 7 mm
on request
In stock
56 pieces in stock
from
1
Pieces
US $ 21.40
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
US $ 17.84
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
692 pieces in stock
from
1
Pieces
US $ 10.17
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
US $ 8.47
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 |
| Nominal ⌀ DC | 7 | 7 |
| Point angle | 130 | 130 |
| Tolerance nominal ⌀ | h8 | h8 |
| Type | W | W |
| Flute length Lc | 102 | 69 |
| Shank ⌀ Ds | 7 | 7 |