{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Bearing separator individual 5
Article no.: 884600 5
Article code:
Product details
Technical Data
| Clamping range dimension A | 30 mm - 250 mm | |
| Spacing of side pins dimension B | 250 mm | |
| Connection thread for bearing extractor | G3/4 | |
| Type of product | Separator |
Identification numbers & Classifications
| Article number | 884600 5 | |
| EAN / GTIN | 4021176007453 | |
| Manufacturer number | 15-5 |
Description
Version:
Bearing separator of high-quality tool steel.
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
The separation jaws are tensioned by tightening the nuts on the side spindles.
Application:
For the separation of tightly wedged ball bearings, gears, etc., if the gap is too small for normal extraction arms.