{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Rund hålpunch med kullager 63,5 mm
Article no.: 834100 63,5
Article code:
Product details
Technical Data
| dynans ⌀ (hål-⌀) | 63,5 mm | |
| för metrisk gänga enligt DIN EN 60423 | M63×1,5 | |
| tryckskruv | M 20×1,5×80 | |
| förborrad hål-⌀ | 21 mm | |
| tryckskruvens nyckelvidd | 30 mm | |
| för materialtjocklek (plåt St 37) | 3 mm | |
| för rostfri stålplåt beroende på hållfasthet upp till | 2 mm | |
| Produktslag | Håltagningsverktyg |
Identification numbers & Classifications
| Article number | 834100 63,5 | |
| EAN / GTIN | 2050001002501 |
Description
Version:
Consisting of matrix, punch, and draw bolt.
With ball thrust bearing = for easier operation using a wrench. Friction between punch and screw is reduced, so less force is required.
With ball thrust bearing = for easier operation using a wrench. Friction between punch and screw is reduced, so less force is required.
Application:
For punching holes into diverse materials such as sheet steel, sheet stainless steel, sheet aluminium, sheet copper etc. Particularly useful where access is difficult (e.g. large sheet metal plates, control cabinets, fuse boxes, junction boxes, dashboards, sink basins, bodywork etc.). Not suitable for pipework. It is imperative to grease the pressure screw and matrix before use.
Operation:
a) using a wrench
b) using manual hydraulics No. 834655 size 1.
c) using a manual hydraulic drive No. 834700. From 50 mm ⌀ upwards the use of the manual hydraulic drive is recommended.
Operation:
a) using a wrench
b) using manual hydraulics No. 834655 size 1.
c) using a manual hydraulic drive No. 834700. From 50 mm ⌀ upwards the use of the manual hydraulic drive is recommended.
Material:
Special tool steel, burnished.
Note:
- When using hydraulic tools, use draw bolt No. 834070 (optional accessory) instead of the pressure screw.
- Size 32 and 35 for holes in stainless steel sinks, to attach 1/2 inch sink fitments.