{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Tournevis dynamometrique avec vernier, porte-lames 500 cNm
Article no.: 659957 500
Article code:
Click to enlarge image
Click to enlarge image
Lame 6 mm
- Sens de serrage: Serrage à droite
- Précision de mesure du couple: ±6
- Certificat d'étalonnage: Certificat d’étalonnage du fabricant
Product details
Technical Data
| Couple maximal | 500 cNm | |
| Sens de serrage | Serrage à droite | |
| Précision de mesure du couple | ±6 % | |
| Certificat d'étalonnage | Certificat d’étalonnage du fabricant | |
| Longueur totale L | 124 mm | |
| Plage de couples | 100 cNm - 500 cNm | |
| Plage de couples | 1 Nm - 5 Nm | |
| Graduation 1 trait = | 10 cNm | |
| Lames de rechange adaptées | 6 mm | |
| Affichage | analogique | |
| Signalisation de déclenchement | acoustique; haptique | |
| Principe de déclenchement | Déclenchement à course courte mécanique | |
| Type de raccordement | Lames interchangeables | |
| Métrologie | mécanique | |
| Couple fixe | non | |
| Possibilité de journalisation des données | non | |
| Réglage de la valeur de déclenchement | avec vernier de réglage | |
| Feedback | à déclenchement | |
| Procédé de mesure | Couple | |
| Réglage de la valeur de déclenchement | réglable | |
| Norme | DIN EN ISO 6789 | |
| Type de produit | Tournevis dynamométriques |
Identification numbers & Classifications
| Article number | 659957 500 | |
| EAN / GTIN | 7610733291717 | |
| Manufacturer number | 8317.A 1,0-5,0 NM |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.