{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Magnetic gripper, ⌀ D: 80mm
Article no.: 358711 80
Copy
Article code:
Copy
Product details
Technical Data
| ⌀ D | 80 mm | |
| ⌀ D1 | 20 mm | |
| Height H1 | 98.5 mm | |
| Height H2 | 48.5 mm | |
| Height H3 | 12 mm | |
| Magnet ⌀ | 10 mm | |
| Magnet retaining force | 4.5 kg | |
| minimum operating pressure | 30 bar | |
| maximum operating pressure | 50 bar | |
| Operation mode | Compressed air; Cooling lubricant | |
| Type of product | Magnetic gripper |
Identification & Classification
| Article number |
358711 80
Copy |
|
| EAN / GTIN |
4062406241773
Copy |
|
| Manufacturer number |
358711 80
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Optimised and safe working procedure.
- Collision protection when approaching thanks to compression spring safety compensation of 10mm.
- By exchanging the inserts, individual workpiece geometries can be automatically separated, transported and stored.
- Machine running times without long interruptions.
- High efficiency due to optimised utilisation.
- Significantly less contamination by oil mist.
- Permits unmanned operation.
- Reduces the risk of injuries.
- Can be used in all commonly-used Weldon arbors.
Application:
The tool can lift and release ferro-magnetic workpieces. Activation of the magnet by coolant (IKZ) or compressed air. Positive engagement of the machined workpiece by closure with the matching contour of the exchangeable plate, for transport to the desired destination within the machine room.
Supplied with:
Supplied with exchangeable plate 358716 with height 20 mm. Supplied with spring and clamping screw for the Weldon arbor.
Warning:
Intended use
Reasonably foreseeable misuse
- For work in industrial environments.
- Magnetic gripper for machining ferro-magnetic workpieces.
- Magnetic gripper for installing in a CNC milling machine with through-coolant.
- The magnetic gripper is an interchangeable piece of equipment for use in CNC milling machines with through-coolant.
- A coolant stream is necessary for it to function.
- Use only in conjunction with a Weldon arbor.
Reasonably foreseeable misuse
- Only to be used in line with the intended use.
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Use only when it is technically in good condition and safe to operate.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not subject it to blows, impacts or heavy loads.