{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pull stud sealed, form B 50
Article no.: 308650 50
Article code:
- Pull stud standard: ISO 7388
Product details
Technical Data
| suitable for steep tapers | 50 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388 | |
| Collar ⌀ D | 36 mm | |
| Head ⌀ D1 | 29.1 mm | |
| Overall length L | 65.5 mm | |
| L1 | 25.55 mm | |
| Thread M | M24 | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308650 50 | |
| EAN / GTIN | 4045197150998 | |
| Manufacturer number | 308650 50 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Pull stud sealed, form B 50
on request
In stock
114 pieces in stock
US $ 16.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
457 pieces in stock
US $ 17.69
plus VAT at the current rate
Prices plus delivery costs
|
|
| Pull stud standard | ISO 7388 | ISO 7388 |
| Collar ⌀ D | 36 | 36 |
| Thread M | M24 | M24 |
| L1 | 25.55 | 25.55 |
| maximum tightening torque | 150 | 150 |
| Hole characteristics | with bore | with bore |
| Type of product | Pull Stud | Pull Stud |