{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Smooth rolling tool EGI5-32AI universal VDI40
Article no.: 291530 VDI40
Article code:
- Cutting direction: Left-hand and right-hand
Product details
Technical Data
| Shank mounting type | VDI40 | |
| Cutting direction | Left-hand and right-hand | |
| Overhang LA | 168 mm | |
| Tip centre offset f | 58 mm | |
| Usable length LN | 100 mm | |
| Minimum pre-drill ⌀ Dmin | 32 mm | |
| maximum rolling force | 3 kN | |
| Roll ⌀ | 5 mm | |
| Type of product | Smooth rolling tool |
Identification numbers & Classifications
| Article number | 291530 VDI40 | |
| EAN / GTIN | 4060491000275 | |
| Manufacturer number | EGI5-32AI-1-VDI40-WL100 |
Description
Version:
For use on CNC and conventional lathes.
With symmetrical structure – can be used universally as right-hand or left-hand version.
High flexibility due to external and internal use.
Independent of diameter (within the recommended range) for internal machining.
With symmetrical structure – can be used universally as right-hand or left-hand version.
High flexibility due to external and internal use.
Independent of diameter (within the recommended range) for internal machining.
Advantage:
Surface quality Rz < 1 µm possible.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Application:
For mechanical surface finishing.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
For external ⌀ from 10 mm and internal ⌀ from 32 mm.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
For external ⌀ from 10 mm and internal ⌀ from 32 mm.
Suitable for:
⌀ range outside (recommended): 10 mm – 100 mm
⌀ range inside (recommended): 32 mm – 150 mm
⌀ range inside (recommended): 32 mm – 150 mm
Supplied with:
Two spare rolls built in the cage.
Note:
- Other shank connections on request.
- Detailed technology recommendations can be found in the instruction manual.