{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KYOCERA Dreh-Wendeschneidplatte WN.G 080404, für mittlere Bearbeitung, Sorte PDL010
Article no.: 252112 PDL010
Article code:
Product details
Technical Data
| ISO-Code Wendeschneidplatte | WNMG 080404 | |
| Eckenradius | 0,4 mm | |
| Sorte | PDL010 | |
| Schneidstoff | HM | |
| Hauptanwendung | N | |
| Schnittbedingung | leicht unterbrochen | |
| Spanbrecher | AH | |
| Toleranz | G | |
| Schnitttiefe ap | 1 mm - 3,5 mm | |
| Vorschub f | 0,1 mm/U - 0,4 mm/U | |
| Schnittgeschwindigkeit vc Hauptanwendung | 200 m/min - 600 m/min | |
| Beschichtung | beschichtet | |
| Anzahl Wechsel/Schneiden | 6 | |
| Schlicht/Schrupp-Zuordnung | Schrupp-Schlichten | |
| Produktart | Wendeschneidplatte zum Drehen |
Identification numbers & Classifications
| Article number | 252112 PDL010 | |
| EAN / GTIN | 4960664848577 |
Application Table
N
N
N
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
KYOCERA Dreh-Wendeschneidplatte WN.G 080404, für mittlere Bearbeitung, Sorte PDL010
on request
In stock
391 pieces in stock
from
1
Pieces
35,74 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
29,78 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
from
1
Pieces
US $ 11.41
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
US $ 9.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
163 pieces in stock
from
1
Pieces
US $ 13.33
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
US $ 11.11
plus VAT at the current rate
Prices plus delivery costs
|
|
| Schlicht/Schrupp-Zuordnung | Schrupp-Schlichten | Finishing | Finishing |
| Schnittbedingung | leicht unterbrochen | slightly interrupted | slightly interrupted |
| Sorte | PDL010 | HU7305-1 | HU7305-1 |
| Spanbrecher | AH | AM1 | AM1 |
| Schnittgeschwindigkeit vc Hauptanwendung | 200 m/min - 600 m/min | 400 m/min - 700 m/min | 400 m/min - 700 m/min |
| Produktart | Wendeschneidplatte zum Drehen | Indexable insert for turning | Indexable insert for turning |
| Toleranz | G | M | M |