{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Quatron® indexable drill Combination shank 19,5 mm
Article no.: 235500 19,5
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Find similar products here:
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ D | 19.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 40 mm | |
| Overhang LA | 64 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank length Ls | 56 mm | |
| ISO code indexable insert | SOEX 060306 18-.. | |
| Pack of insert screws | 239652 6IP2 (1.0 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 120 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235500 19,5 | |
| EAN / GTIN | 4047109047174 | |
| Manufacturer number | U10 11950 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.