{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 25/2 mm
Article no.: 222060 25/2
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Machining strategy: HPC
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Milling application | Circular milling; Plunging; Ramping | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| ⌀ D3 | 8 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| Circular interpolation milling ⌀ Dmin | 33 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 2.79 degrees | |
| Ramping length L for αmax | 7.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222060 25/2 | |
| EAN / GTIN | 4960664712458 | |
| Manufacturer number | THN07550 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
High feed rate milling cutter MFH Harrier 25/2 mm
on request
In stock
5 pieces in stock
US $ 370.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
US $ 314.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
US $ 245.27
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
US $ 277.89
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting thread M | M12 | M12 | M12 | M12 |
| Milling application | Circular milling ;Plunging ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging |
| suitable indexable insert | SOMT.. | XD.. 09T308 | XDM.090416 | XOMU094812 |
| Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
| Cutting edge ⌀ DC | 25 | 25 | 25 | 25 |
| Machining strategy | HPC | HPC | HPC | HPC |
| Ramping length L for αmax | 7.4 | 8.5 | 10.43 | 12.55 |