{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HAIMER MILL end mill 4 mm
Article no.: 220289 4
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | AlTiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 32 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 11 mm | |
| Overhang length L1 incl. recess | 15 mm | |
| Recess ⌀ D1 | 3.8 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.022 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.026 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 220289 4 | |
| EAN / GTIN | 4034221136794 | |
| Manufacturer number | F2004NNH0400SDA |
Application Table
N
480
N
480
N
350
P
275
P
255
P
210
P
190
M
95
M
75
S
35
K
155
Description
Version:
For general-purpose use in steel materials and high-alloy steels, especially stainless steel. With cylindrical core for optimised tool stiffness when milling slots. Reliable processes guaranteed when ramping and during circular interpolation milling thanks to special end face geometry.
Note:
For HB use order No. 220291.
Tool holders with the SAFE-LOCK pull-out protection can be found under clamping technology.
Tool holders with the SAFE-LOCK pull-out protection can be found under clamping technology.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
HAIMER MILL end mill 4 mm
on request
In stock
5 pieces in stock
US $ 35.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
US $ 50.38
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | AlTiN | uncoated |
| Standard | DIN 6527 | DIN 6527 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Tool material | Solid carbide | Solid carbide |
| Type | N | W |
| No. of teeth Z | 4 | 3 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical |