{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Fasenfräser mit Bohrung, für Wendeschneidplatten AP.., Winkel γ 75 Grad
Article no.: 215795 75
Article code:
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| suitable indexable insert | AP.. 1003 | |
| Angle γ | 75 degrees | |
| Shank type | with bore | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 3 | |
| Number of indexable inserts | 9 | |
| Overall length Ltot | 60 mm | |
| smallest ⌀ D | 19 mm | |
| largest ⌀ D1 | 33 mm | |
| achievable chamfer width b | 7 mm | |
| achievable chamfer length l | 27.5 mm | |
| achievable chamfer height h | 27 mm | |
| Mounting bore ⌀ | 16 mm | |
| Feed rate per tooth at hmax | 0.11 mm | |
| Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 215795 75 | |
| EAN / GTIN | 4045197383259 | |
| Manufacturer number | 215795 75 |