{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Number of cutting edges Z: 5
- Setting angle κ: 45
- Milling application: Circular milling; Ramping
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 45 degrees | |
| Milling application | Circular milling; Ramping | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 71 mm | |
| maximum external ⌀ Dmax | 71.2 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| Circular interpolation milling ⌀ Dmin | 134 mm | |
| Circular interpolation milling ⌀ Dmax | 140 mm | |
| Circular interpolation milling ap | 1.5 mm | |
| Ramping angle αmax | 0.47 mm | |
| Ramping length L for αmax | 60.5 mm | |
| suitable indexable insert | SD... 0903 | |
| Pack of insert screws | 219809 (8IP; 1.5 Nm) | |
| Type of product | Face mill |
Identification numbers & Classifications
| Article number | 214400 63/5 | |
| EAN / GTIN | 4045197131768 | |
| Manufacturer number | 214400 63/5 |
Description
Version:
High number of cutting edges for very high productivity. Positive rake for soft cut and low power consumption.
Advantage:
Very high productivity due to:
- Very high cutting speeds.
- Very high feed rates.
- Short machining times.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable face mill 45° 63/5 mm
on request
Subsequent delivery
0 pieces in stock
US $ 560.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
US $ 553.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
US $ 500.20
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 5 | 5 |
| Overall length Ltot | 40 mm | 40 mm | 40 mm |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | SD... 0903 | SE.. 1203.. | OF.. 050405 |
| Shank type | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 63 mm | 63 mm | 63 mm |
| Type of product | Face mill | Face mill | Face mill |