{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
TwinCut indexable face mill 45° normal pitch 63/5 mm
Article no.: 213415 63/5
Article code:
- Number of cutting edges Z: 5
- Setting angle κ: 45
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Series | TwinCut | |
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum external ⌀ Dmax for ON.U inserts | 74.8 mm | |
| maximum external ⌀ Dmax for SN.U inserts | 78.2 mm | |
| Overall length Ltot for SN.U inserts | 40 mm | |
| Overall length Ltot for ON.U inserts | 38.3 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SN.U; ON.U | |
| Pack of insert screws | 219898 (15IP; 3.8 Nm) | |
| Shim | 219897 | |
| Clamp screw for shim | 219899 | |
| Type of product | Face mill |
Identification numbers & Classifications
| Article number | 213415 63/5 | |
| EAN / GTIN | 4045197605498 | |
| Manufacturer number | 213415 63/5 |
Description
Exécution:
A partir de ⌀ 160 mm, pour mandrins suivant DIN 2079 avec 4 trous de fixation supplémentaires et sans arrosage interne.
Utilisation:
Avec plaquettes double face à 8 arêtes (ON.U) ou à 4 arêtes (SN.U).
Pièce(s) de rechange:
Sous-plaquette 219897 utilisable pour les deux types de plaquettes.
Remarque(s):
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
TwinCut indexable face mill 45° normal pitch 63/5 mm
on request
Delivery in 3 - 4 working days
2 pieces in stock
US $ 662.11
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
2 pieces in stock
CHF 275.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 22 mm | 22 mm |
| suitable indexable insert | SN.U; ON.U | SE.. 1204.. |
| Shank type | with bore | avec alésage |
| Cutting edge ⌀ DC | 63 mm | 63 mm |
| Pack of insert screws | 219898 (15IP; 3.8 Nm) | 219848 (20IP; 5,7 Nm) |
| Spacing of the cutters | unequal spacing | Différent |
| Type of product | Face mill | Fraises à surfacer |