{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable face mill 43° Octo 125/8 mm
Article no.: 213300 125/8
Article code:
- Number of cutting edges Z: 8
- Setting angle κ: 43
- Milling application: Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 125 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Setting angle κ | 43 degrees | |
| Milling application | Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum external ⌀ Dmax | 134 mm | |
| Overall length Ltot | 63 mm | |
| Mounting bore ⌀ | 40 mm | |
| suitable indexable insert | OF.. 050405 | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Setting angle κ | 43 degrees | |
| Type of product | Face mill |
Identification numbers & Classifications
| Article number | 213300 125/8 | |
| EAN / GTIN | 4045197702043 | |
| Manufacturer number | 213300 125/8 |
Description
Version:
43° indexable face mill with up to 8 edges per milling insert.
Application:
Very good surface finishes are obtained due to the positive geometry. Smooth-cutting face mills.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable face mill 43° Octo 125/8 mm
on request
In stock
3 pieces in stock
US $ 849.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
US $ 1,083.78
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 |
| Mounting bore ⌀ | 40 | 40 |
| Through-coolant | yes | yes |
| suitable indexable insert | OF.. 050405 | SN.U ;ON.U |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 125 | 125 |
| Type of product | Face mill | Face mill |