{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Aluminium shoulder mill 40/3
Article no.: 211759 40/3
Article code:
- Setting angle κ: 90
- Milling application: Ramping; Circular milling; Plunging
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Ramping; Circular milling; Plunging | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| ⌀ D3 | 30 mm | |
| Circular interpolation milling ⌀ Dmin | 70 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Circular interpolation milling ap | 9 mm | |
| Ramping angle αmax | 3.12 degrees | |
| Ramping length L for αmax | 27.56 mm | |
| suitable indexable insert | ZDHT 1505 | |
| Pack of insert screws | 219878 4 (15IP) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 211759 40/3 | |
| EAN / GTIN | 4062406681777 | |
| Manufacturer number | 211759 40/3 |
Description
Version:
High-performance milling system for high cutting speeds. Absolutely precise insert bedding. Exceptional torsional stiffness thanks to optimised protection against centrifugal force.
Attention:
Before using the indexable insert No. 211776 ALU (r = 5.0 mm) and 211777 ALU (r = 6.0 mm), the insert seats of the carrier must be modified.
Note:
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Aluminium shoulder mill 40/3
on request
In stock
20 pieces in stock
US $ 432.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
US $ 450.67
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
US $ 305.68
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 16 | 16 | 16 |
| Milling application | Ramping ;Circular milling ;Plunging | End milling | Corner milling ;Circular milling ;Ramping |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | ZDHT 1505 | SO.. 1205.. | AP.. 1805.. |
| Shank type | with bore | with bore | with bore |
| Setting angle κ | 90 | 90 | 90 |
| Type of product | End / face mill | End / face mill | End / face mill |