{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide micro slot drill 0,6X2 mm
Article no.: 209700 0,6X2
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Tolerance nominal ⌀: 0 / −0.005
- No. of teeth Z: 2
- Helix angle: 25
Product details
Technical Data
| Cutting edge ⌀ DC | 0.6 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Tolerance nominal ⌀ | 0 / −0.005 | |
| No. of teeth Z | 2 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Flute length Lc | 0.9 mm | |
| Overhang length L1 incl. recess | 2 mm | |
| Recess ⌀ D1 | 0.58 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 4 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in graphite | 0.016 mm | |
| Feed fz for side milling in graphite | 0.02 mm | |
| Correction factor ap corr | 1 | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 209700 0,6X2 | |
| EAN / GTIN | 4045197917041 | |
| Manufacturer number | 209700 0,6X2 |
Application Table
N
200
N
190
N
170
N
150
N
180
N
160
N
350
N
190
N
190
N
340
N
Description
Version:
With crystalline diamond sp3 coating. For the highest demands regarding performance and precision in fibre-reinforced composites, CRP, GRP, and graphite. Extremely tight tolerances ensure maximum accuracy. Double relief ground with 2 hollow-ground chamfers. Recess angle α = 16°.
Tolerances:
Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.1×D×ap korr
side milling: ap = 0.2×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.1×D×ap korr
side milling: ap = 0.2×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z