{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter Composite, compacting cut 8 mm
Article no.: 209542 8
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Tolerance nominal ⌀: h10
- No. of teeth Z: 8
- Helix angle: 8
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 8 | |
| Helix angle | 8 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 19 mm | |
| Overhang length L1 incl. recess | 25 mm | |
| Recess ⌀ D1 | 7.8 mm | |
| Overall length L | 63 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.16 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in GRP CRP | 0.031 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 209542 8 | |
| EAN / GTIN | 4062406366162 | |
| Manufacturer number | 209542 8 |
Application Table
N
80
N
80
N
80
N
80
N
80
N
80
N
165
N
120
N
120
N
180
N
Description
Version:
Tool cutting edge has been specifically developed further for optimal machining of composite materials.
Overall length similar to DIN 6527 long.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.
Overall length similar to DIN 6527 long.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.