{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, Diamond, ⌀ h10 DC: 6mm
Article no.: 209517 6
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Tolerance nominal ⌀: h10
- No. of teeth Z: 4
- Direction of infeed: horizontal and oblique
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 4 | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 21 mm | |
| Cutting section dragging LA | 10 mm | |
| Overall length L | 65 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in GRP CRP | 0.06 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification & Classification
| Article number |
209517 6
Copy |
|
| EAN / GTIN |
4045197468307
Copy |
|
| Manufacturer number |
209517 6
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
200
suitable for / [m/min]
N
ISO code:
190
suitable for / [m/min]
N
ISO code:
170
suitable for / [m/min]
N
ISO code:
150
suitable for / [m/min]
N
ISO code:
180
suitable for / [m/min]
N
ISO code:
160
suitable for / [m/min]
N
ISO code:
350
suitable for / [m/min]
N
ISO code:
190
suitable for / [m/min]
N
ISO code:
190
suitable for / [m/min]
N
ISO code:
340
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Twisted and curved cutting edges, which enable burr-free milling of both the upper and lower edges of fibre-reinforced composites.
Delamination is prevented because the cutter performs a cut which is simultaneously dragging and compacting. The cutter must be positioned centrally to the cross section of the material.
Delamination is prevented because the cutter performs a cut which is simultaneously dragging and compacting. The cutter must be positioned centrally to the cross section of the material.