{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide router cutter compacting cut fine 4 mm
Article no.: 209512 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: staggered teeth
- Tolerance nominal ⌀: h10
- Direction of infeed: horizontal, oblique and vertical
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | Diamond | |
| Toothing grit designation | fine | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | staggered teeth | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed f for side milling in GRP CRP | 0.21 mm/rev. | |
| Colour ring | black | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Type of product | Router |
Identification numbers & Classifications
| Article number | 209512 4 | |
| EAN / GTIN | 4045197509802 | |
| Manufacturer number | 209512 4 |
Application Table
N
200
N
190
N
170
N
150
N
180
N
160
N
190
N
190
N
Description
Version:
High performance diamond-pattern cut for efficient roughing of fibre-reinforced composites.