{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide router cutter compacting cut medium 10 mm
Article no.: 209425 10
Article code:
- Tool material: Solid carbide
- Norm: Manufacturer’s standard
- Milling profile: staggered teeth
- Type: W
- Tolerance nominal ⌀: h10
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | uncoated | |
| Toothing grit designation | medium | |
| Tool material | Solid carbide | |
| Norm | Manufacturer’s standard | |
| Milling profile | staggered teeth | |
| Type | W | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 3 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 25 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f for side milling in POM GF25 | 0.3 mm/rev. | |
| Feed f for side milling in PEEK CF30 | 0.2 mm/rev. | |
| Colour ring | yellow | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Type of product | Router |
Identification numbers & Classifications
| Article number | 209425 10 | |
| EAN / GTIN | 4045197477682 | |
| Manufacturer number | 209425 10 |
Application Table
N
120
N
120
N
100
N
100
N
120
N
110
N
120
N
120
Description
Version:
High performance diamond-pattern teeth for efficient machining of fibre-reinforced composites. For slot cutting in the roughing range.
Compacting cut, the material is pushed down on to the substrate. Highly suitable for thin materials.
Compacting cut, the material is pushed down on to the substrate. Highly suitable for thin materials.